High quality is the NO.1 selling point of SANY excavator, while any machines cannot totally avoid been maintained and repaired. SANY is also been famous for its excellent after-sale service and maintenance. Before you start the Excavator maintaining, pleas follow up the following procedures: 1.Park the machine on solid and flat ground; 2. Lower the excavator bucket to the ground; 3. Place blocks under the tracks to prevent movement of the excavator; 4. Turn the fuel control dial to first gear. Run the engine at low speed for 5 minutes; 5. Turn the start switch to OFF position and stop the engine; Small Excavators 6. Turn the start switch to ON position. Operate the control levers 2 or 3 times in all directions to relieve internal pressure of the hydraulic system; 7. Remove the key from the switch; 8. Place the hydraulic lockout control to the LOCKED position. Mini Excavators for Sale

About the maintenance persons, there are also some attentions should be paid before and during the excavator maintenance. First of all, please wear protective clothing and shoes necessary for the job. Wear rubber apron and rubber gloves when handling corrosive materials. Heavy Excavator Wear heavy gloves when handling wooden materials, wire ropes or sharp-edged metals.

Loud noise may impair your hearing permanently or temporarily. When maintaining the excavator engine, wear ear covers or ear plugs if you have to work in loud noise for a long time. Large Excavator Another thing should be noticed is that when using a hammer to strike hard metal parts such as pin, bucket teeth, cutting edge or shaft, the flying of parts and metal pieces may cause bodily injury. Therefore, wear goggles and gloves and ensure the surrounding area is clear of any other people. Wheel Loader